Corporate Headquarters: Spain

+34 96 689 05 39

Project experiences


Major refurbishment of 7 Ensco platforms in The Netherlands; all protective coatings supplied by MCU-Coatings. UHP water jetting surface preparation; MCU-Coatings have outstanding abrasion resistance and superior adhesion with minimal surface preparation.

Extreme cold winter weather and hot summers in Kiev, Ukraine, made the owners decide to use MCU-Coatings alongside of the original spec for 2 pack Epoxy/PU as the project had big delays due to weather restrictions for 2 pack EP/PU products. MCU-Coatings, resisting winter application and high humidity damp weather, speeded up the projects, not having the down times and was able to offer fast over-coating even in cold winter climates.

Tanks, including ballast, grey water, slop and drinking water tanks, superstructures and decks, coated with MCU-Miozinc, MCU-Miomastic and MCU-Topcoats

MCU-Coatings products provide high tolerance to light to medium flash rusting and damp substrates. MCU-Miozinc is world’s 1st and still the only surface tolerant zinc rich coating. Performance is not reduced by flash rust and preparation by either; St3, WJ 2, Sa 2, in heavy duty RoRo decks, yields still long-life performance.

MCU-Coatings is natural for overcoating different old coatings, galvanization in severe cold and humid or hot conditions. MCU-Coatings is solely specified for huge new build and renovation Transmission Lines projects.

MCU-Coatings®, an unique single component polyurea coating technology called MCU
Together with an unbeatable long-term life cycle performance, these coatings have numerous advantages both for the applicator and the owner!

MCU-Coatings can do the job where others fail and our track record of is impressive. The up to 3 times longer life cycle of MCU- Coatings, as compared to an epoxy / polyurethane system, is due to the extreme surface tolerance, the climate non-restrictions and the physical properties. MCU-Coatings’ technology has chemistry with superior characteristics, such as extreme corrosion resistance with greater flexibility, chemical resistance as high abrasion and impact resistance. A 3 layers coatings system can be applied in 1 day. All together MCU-Coatings has virtually eliminated most of all crucial key elements that cause coating “Premature Failures”.


Please review the information on our products in our site and contact us for any additional information, which you may require at .