Protective Coatings - Product Data Sheets
Some contractors haven chosen International Paint as best for industrial maintenance, others swear by Hempel, Sigma Coatings, Jotun, Ameron or Carboline. None of them can offer the ease of use, the stability and the performance of MCU’s single component moisture cure urethane coatings in one product line. No mixing errors, no dew point or humidity restrictions, limited temperature restrictions (-12°C min.), no pot life, only one thinner, entire plant maintenance schemes reduce to three single component MCU products, … and the list goes on. The dream of any contractor or owner. Try it out yourself. Have a look at our system sheets to see which MCU Coating system is used on the area that you need to protect from corrosion. This can be concrete, steel, corton steel, stainless steel, aluminum or cupper in atmospheric or immersion service. Primers mcu-zinc | | - Surface tolerant single component, zinc rich primer
- Approved for Class B Slip Coefficient.
- Versatile, easy to use, corrosion resistant primer.
- Replaces epoxy zinc. Better performance than inorganic zinc.
| - Unlimited recoat time
- Overcoatable by itself
- Tolerates flash rusting
- High DFT tolerance
- 1 primer for any type of surface prep. including UHP WJ, Dry blasting, wet abrasive blasting, power tool cleaning, hand tool cleaning, ….
| mcu-miozinc | | - Surface tolerant MIO/zinc filled primer.
- Better surface tolerance than epoxy mastic
- Outperforms inorganic zinc primers
- High DFT tolerance and unlimited recoatable by itself
- Compatible with most old coatings and different alloys.
| - Full or spot primer on hand and power tool cleaned, (wet/dry) abrasive blasted or UHP cleaned surfaces.
- Versatile, easy to use, corrosion resistant primer.
- Does not require Sa 2.5 for for maximum performance.
- Tolerates flash rusting
- Recommended for immersion, splash zone and atmospheric exposure
| mcu-aluprime | | - Most surface tolerant primer.
- Low viscosity, penetrating sealer to replace epoxy penetrating sealers.
- Outstanding abrasion & impact resistance
| - Can be used in combination with any type of surface preparation
- Intermediate/Topcoat in highly abrasive environments
| Intermediates/Topcoats mcu-ferroguard | | - MIO filled, refined coal tar MCU.
- Outperforms coal tar epoxy in all uses.
- Immerse within 30 minutes with or without the use of QuickCure in most conditions.
- Available in black or red.
- Less irritating than conventional coal tar epoxy.
- Two coat MC-Ferroguard system passes 5,000 hours prohesion testing on steel.
| - On any marine, offshore, hydro, wastewater or other structure exposed to salt or fresh water and sewage treatment.
- Above or below grade service direct to concrete or steel.
- Easily re-coatable and repairable.
| mcu-mastic | | - Universal intermediate coat
- Coloured topcoat for interior use where there is limited UV exposure and slight ambering is acceptable
- Aromatic topcoat to replace epoxy
- High resistance to atmospheric chemicals
| - Best choice in salt or fresh water immersion service.
- Ideal for use over MCU primers for long term pefromance in ballast tanks and cargo holds.
- Free of tar
| mcu-masthetic | | - Intermediate coating that provides the smoothest finish of all our intermediate products
- Recommended for priming concrete when coloured topcoats are required
| - Excellent secondary containment concrete coating for mild chemical exposure
| mcu-miomastic | | - Used as an intermediate coat for new construction and full removal projects.
- High-solids aromatic intermediate for atmospheric service.
- Miomastic contains a proprietary blend of MCU resin and MIO and has many application and performance advantages compared to epoxy mastics.
- Available as a stock item in standard grey beige.
| - On any marine, offshore, hydro, wastewater or other structure exposed to salt or fresh water and sewage treatment
- Easily re-coatable and repairable
- Ideal to use over MCU primers for long term performance in atmospheric and interior service
| mcu-zincmastic | | - High solids intermediate coat for overcoating old coatings (incl. lead based) in atmospheric or interior service
- Contains a proprietary blend of MIO and corrosion inhibitors
- Available as a stock item in standard light grey
| - Adds performance to spot primed areas
- Easily re-coatable and repairable
| Topcoats mcu-topcoat | | - Semi-gloss aliphatic topcoat.
- Available in RAL and custom colours.
| - Light stable exterior topcoat for atmospheric use
- Applies directly to galvanised and other non-ferro substrates
| mcu-miotopcoat | | - MIO modified, low sheen aliphatic topcoat
- Available in dark colours
- Recommended for overcoating old coatings
| - Very durable topcoat for atmospheric service
- MIO modification greatly extends coating life and allows easy overcoating for years
| mcu-alutopcoat | | - Aluminum filled topcoat.
- Very durable, abrasion and weather resistant topcoat.
| - Outstanding topcoat for restoring weathered galvanized steel.
| Accelerator QuickCure | | - Speeds up cure times by 80%
- Cure time reduced to 30 minutes, depending on temperature
- Pot life still one day when spraying
| - Increases the DFT tolerance of the MCU products.
- Increases gloss
- Adds performance
- Increases production
|
|
