MCU COATINGS INTERNATIONAL
Corporate Headquarters: Spain
e-mail:
+34 96 689 05 39
Industries
Mining Marine Offshore Oil & gas Chemical plants Energy Infrastructure and bridges Equipment & vehicle Project experiences

MCU-Coatings® for Mining application:

Our MCU-Coatings standard system exceeds 15.000 hours and up to 20.000 hours salt fog exposure. Together with the intrinsic chemical resistance of the binder and its pigments MCU-Coatings offers the solution for your corrosion problems.

Extreme abrasive resistance combined with the cathodic protection by our zinc particles and high barrier effect, this MCU-Coatings system can be used for immersed and non-immersed mining, processing and infrastructures. Shut downs for repainting can be shortened by 30 - 40% when using MCU-Coatings compared with 2 pack Epoxy/PU systems.

In addition to the protection, MCU-Coatings systems offers the easiest application available:

* Can be applied at high humidity (up to 99% RH)
* No dew point restriction on visible dry surfaces (day and night application possible)
* Our Primer MCU-Miozinc tolerates over-coating old “good” coatings
* Our Primer MCU-Miozinc tolerates St 2 and St 3, UHP and abrasive prepared surfaces
* Application in cold weather down to minus -15°C and steel temperature up to 70°C
* Superior impact and abrasion resistance
* Excellent long-life flexibility, resisting structural flex
* Excellent adhesion to various substrates
* Can be over-coated within 30-40 minutes of application
* Proves faster project completion time at lower implementation cost on any project that has to deal with climatic weather restrictions.

MCU-Coatings®, an unique single component polyurea coating technology called MCU
Together with an unbeatable long-term life cycle performance, these coatings have numerous advantages both for the applicator and the owner!

MCU-Coatings can do the job where others fail and our track record of is impressive. The up to 3 times longer life cycle of MCU- Coatings, as compared to an epoxy / polyurethane system, is due to the extreme surface tolerance, the climate non-restrictions and the physical properties. MCU-Coatings’ technology has chemistry with superior characteristics, such as extreme corrosion resistance with greater flexibility, chemical resistance as high abrasion and impact resistance. A 3 layers coatings system can be applied in 1 day. All together MCU-Coatings has virtually eliminated most of all crucial key elements that cause coating “Premature Failures”.

CONTACT

Please review the information on our products in our site and contact us for any additional information, which you may require at .