MCU COATINGS INTERNATIONAL
Corporate Headquarters: Spain

e-mail:
+34 96 584 14 36

MCU-Coatings® for Chemical plant application

Every chemical plant has its own specific conditions, exposed to most extreme environmental elements, chemical fumes and salts-complexes, chemical spills and extreme temperature variations from freezing to high heat. MCU-Coatings is based on proprietary resin technology and formulated to be possibly the most resistant coating to atmospheric chemical attack on the market. With only a few of MCU-Coatings products all these different external areas can be protected instead of 20+ various different product and thinners typically needed with traditional coatings. Same MCU-Coatings´ primer goes for all the areas and an MCU-Coatings’ system still gives more as a double life cycle compare to traditional coatings.

High Heat

For High Heat applications MCU-Coatings offers a 2 layer anticorrosive coating system that protects up to 650°C.

Sweating and Frozen substrates

Specific for gas plants’ sweating and frozen substrates, MCU-Coatings allows you to paint these areas WITHOUT shut down. Even application on 100°C hot surface is allowed with MCU-Miozinc HT.
Imaging the savings!

Pipelines

Pipeline interior and exterior are easy and fast coat-able in 2 or 3 layer systems. Smooth, durable, flexible and abrasion resistant coating will offer long-life cycle protection for your pipes.

In addition to the protection, MCU-Coatings systems offers the easiest application available:

* Can be applied at high humidity (up to 99% RH)
* No dew point restriction on visible dry surfaces (day and night application possible)
* Our Primer MCU-Miozinc® tolerates over-coating old “good” coatings
* Our Primer MCU-Miozinc® tolerates St 2 and St 3, UHP and abrasive prepared surfaces
* Application in cold weather down to minus -15°C and steel temperature up to 70°C
* Superior impact and abrasion resistance
* Excellent long-life flexibility, resisting structural flex
* Excellent adhesion to various substrates
* Can be over-coated within 30-45 minutes of application if when adding MCU-QuickCure
* Proves faster project completion time at lower implementation cost on any project that has to deal with climatic weather restrictions.
* High Heat (HH) coatings up to +650°C

MCU-Coatings®, an unique single component polyurea coating technology called MCU.
Together with an unbeatable long-term life cycle performance, these coatings have numerous advantages both for the applicator and the owner!

MCU-Coatings can do the job where others fail and our track record of is impressive. The up to 3 times longer life cycle of MCU- Coatings, as compared to an epoxy / polyurethane system, is due to the extreme surface tolerance, the climate non-restrictions and the physical properties. MCU-Coatings’ technology has chemistry with superior characteristics, such as extreme corrosion resistance with greater flexibility, chemical resistance as high abrasion and impact resistance. A 3 layers coatings system can be applied in 1 day. All together MCU-Coatings has virtually eliminated most of all crucial key elements that cause coating “Premature Failures”.

CONTACT

Please review the information on our products in our site and contact us for any additional information, which you may require at .